# BNO055 clone - HW-921 bno055

**URL:** <https://community.myracedata.com/t/bno055-clone-hw-921-bno055/367>\
**Category:** Hardware\
**Created:** [October 4, 2026, 5:33pm UTC](https://community.myracedata.com/t/bno055-clone-hw-921-bno055/367 "2026-10-04T17:33:57Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![teamMRD](https://community.myracedata.com/user_avatar/community.myracedata.com/teammrd/32/5_2.png) [@teamMRD](https://community.myracedata.com/u/teamMRD)\
**Post date:** [October 4, 2026, 5:33pm UTC](https://community.myracedata.com/t/bno055-clone-hw-921-bno055/367/1 "2026-10-04T17:33:58Z")

</div>

This chip required soldering the two sets of solder pads for the i2c to work  
here is a picture of the pads soldered:

 ![image](https://community.myracedata.com/uploads/default/original/1X/e8f22f15fc4766eadc3fef4b81d7a891f2143c37.jpeg)  
Once this is done the chip is found at address 0x29

here is a picture of the pads unsoldered:

 ![image](https://community.myracedata.com/uploads/default/original/1X/6f2d49fec70f116e96e7a1beb9acd2ba6819baf8.jpeg)

This chip is now working with the esp32-c3

Note:  
This chip retails for $18 - $19 compared to adafruit at $35
